User`s guide

5-43
Basic Configuration
• HTTPAccess(WebAccess): Enables/disables the Web Browser Interface.
When disabled, users will not be allowed to contact the unit via the Web Browser
Interface. (Default = Off.)
• HTTPPort: Selects the TCP/IP port number that will be used for SSH connections.
(Default = 80.)
• HTTPSAccess: Enables/disables HTTPS communication. For instructions on
setting up SSL encryption, please refer to Section 14. (Default = Off.)
• HTTPSPort: Selects the TCP/IP port number that will be used for HTTPS
connections. (Default = 443.)
Notes:
• IntheTextInterface,HTTPandHTTPSparametersresideinaseparate
submenu.ToenableandconfigureHTTPandHTTPSAccessviathe
TextInterface,accesstheNetworkConfigurationMenuasdescribedin
Section5.9,thentype23,press[Enter]andusetheresultingsubmenu
(Figure14.1)toselectparametersasdescribedinSection14.
• WhentheWebAccessparameterisaccessedviatheTextInterface,the
resultingsubmenuwillalsoallowyoutoselectSSL(encryption)parameters
asdescribedinSection14.
• HardenWebSecurity:When the Harden Web Security feature is On (default,) only
the high and medium cypher suites for SSLv3 and TLSv1 will be enabled. When
the Harden Web Security feature is Off, all SSL protocols will be enabled, allowing
compatibility with older browsers. Note that in the Text Interface, this option is
enabled/disabled via the Web Access submenu. (Default = On.)
• SYSLOGAddresses: Defines the IP addresses for the Syslog Daemon(s) that
will receive log records generated by the TSM/RSM. Allows definition of IP
addresses for both a primary Syslog Daemon and an optional secondary Syslog
Daemon. SYSLOG Addresses can be entered in either IPv4 or IPv6 format, or in
domain name format (up to 64 characters.) For more information, please refer to
Section 11. (Default = undefined.)
Notes:
• TheSyslogAddresssubmenuintheTextInterfaceandtheNetwork
ParameterssubmenuintheWebBrowserInterfacebothincludeaPingTest
functionthatcanbeusedtopingtheuser-selectedSyslogIPAddressesin
ordertoverifythatvalidIPaddresseshavebeenentered.Inorderforthe
PingTestfeaturetofunction,yournetworkand/orfirewallmustbeconfigured
toallowpingcommands.
• InadditiontothePingTestfeature,the/TESTcommandintheTextInterface
orthe"Test"optionintheWebBrowserInterfacecanalsobeusedtoping
thecurrentlydefinedSyslogAddressesinordertomakecertainthattheIP
addressesareresponding.