User`s guide

Apx-13
Appendices
D.3. DIN Rail Mounting
WTI also offers an optional DIN Rail Mounting Kit (WTI Part No. DCM-8R4-DIN) that can
be used to mount the RSM-8R4-DCM on a standard DIN Rail or top hat rail.
To mount the RSM-8R4-DCM on a DIN Rail, first use four screws to attach the DIN
Mounting Brackets to the RSM-8R4-DCM unit as shown in Figure D.4, and then attach
the DIN Mounting Brackets to your DIN Rail.
Note:MakecertainthatthespringloadedlatchesontheDINMounting
BracketsareorientedasshowninFigureD.4,withthelatchespositioned
towardsthefloor.IftheDINMountingBracketsaremountedupsidedown,the
RSM-8R4-DCMunitmaynotbesecurelyfastenedtotheDINRail.
Spring Loaded Latch
Figure D.4: DIN Rail Mounting