User`s guide

17-14
Command Reference Guide
/N Network Port Parameters - IPv4
Displays a menu used to select IPv4 protocol parameters for the Network Port. All
functions provided by the /N command are also available via the Web Browser Interface.
For more information, please refer to Section 5.9.
Availability: Administrator
Format: /N [Enter]
/N6 Network Port Parameters - IPv6
Displays a menu used to select IPv6 protocol parameters for the Network Port. All
functions provided by the /N6 command are also available via the Web Browser
Interface. For more information, please refer to Section 5.9.
Availability: Administrator
Format: /N6 [Enter]
/PNA Ping No Answer Configuration Parameters
(Standard TSM Series and Standard RSM Series Only)
Displays a menu that is used to define IP addresses and other associated parameters
that will be used by the Ping No Answer Alarm. When Ping No Answer IP addresses
have been defined and the Ping No Answer Alarm has been enabled, the TSM/RSM
can ping user-defined IP addresses, and notify you when devices at those IP addresses
are not responding to the ping command. For more information, please refer to
Section 7.4.1.
Note:ThiscommandisonlyavailableonstandardTSMSeriesunitsand
standardRSMSeriesunits.The/PNAcommandisnotavailableonRSM-8R
Seriesunits;instead,PingNoAnswerparametersaredefinedviatheReboot
Optionsmenu.
Availability: Administrator
Format: /PNA [Enter]
/RB Reboot Options (RSM-8R Series Units Only)
Displays a menu that is used to configure Scheduled Reboots and Ping-No-Answer
Reboots. Scheduled Reboots allow the devices connected to RSM-8R Series unit's
switched outlets to be rebooted on a regular basis, according to a user defined
schedule. Ping-No-Answer Reboots allow the RSM-8R Series unit to automatically
reboot specific outlets when a user-specified IP address does not respond to a Ping
command. For more information on Reboot options, please refer to Section 6.
Notes:
• ThiscommandisnotavailableonstandardTSMSeriesandstandardRSM
Seriesunits.The/RBcommandisonlyavailableonRSM-8RSeriesunits.
• Ifdesired,thePing-No-AnswerRebootfunctioncanalsobeconfiguredto
sendemailnotificationwheneveraPing-No-AnswerRebootisgenerated.
Formoreinformation,pleaserefertoSection7.4.
Availability: Administrator
Format: /RB [Enter]