User`s guide
17-2
Command Reference Guide
17.2. Command Summary
Function Command Syntax Command Access Level
Admin. SuperUser User ViewOnly
Display
Port and Plug Status /S [Enter] X X X X
Port Diagnostics /SD[Enter] X X X X
Port Parameters (Who) /W [n][Enter] X X X X
Plug Group Status /SG [Enter] X X X X
Network Status /SN [Enter] X X X X
Network Configuration Summary /RN[Enter] X X X X
IP Alias Status /SA[Enter] X X X X
View Connection (with Echo) /V<n>[Enter] X X
View Connection (without Echo) /VE<n>[Enter] X X
Help Menu /H [Enter] X X X X
Log Functions /L [Enter] X X
Site ID / Unit Information /J [*] [Enter] X X X X
Control
Exit Command Mode /X [Enter] X X X X
Connect - Local <Remote> /C <n> [n][Enter] X X X
Disconnect Ports /D <n|Nn|*>[Enter] X X
Read Buffer /R <n>[Enter] X X X
Erase Buffer(s) /E <n|*>[Enter] X X X
Boot Plug n /BOOT <n>[,Y] [Enter] X X X
Turn Plug n On /ON <n>[,Y] [Enter] X X X
Turn Plug n Off /OFF <n>[,Y] [Enter] X X X
Default All Plugs /DPL[,Y] [Enter] X X X
Send Parameter File /U [Enter] X
Send SSH Keys /K <n> [Enter] X
Unlock Invalid Access /UL [Enter] X
Outbound Telnet /TELNET <ip> [port] [raw][Enter] X X X
Outbound SSH /SSH <ip> -l <username>[Enter] X X X
Broadcast Mode /broadcast <port list>[Enter] X X
Configuration
System Parameters /F [Enter] X
Serial Port Parameters /P [Enter] X
Plug Parameters /PL <n> [Enter] X
Plug Group Parameters /G [Enter] X
Network Configuration - IPv4 /N [Enter] X
Network Configuration - IPv6 /N6[Enter] X
Ping No Answer Configuration /PNA[Enter] X
Reboot Options /RB [Enter] X
Alarm Configuration /AC [Enter] X
Reboot System /I [Enter] X X
Upgrade Firmware /UF [Enter] X
Copy Port Parameters /CP <z>[Enter] X
Test Network Configuration /TEST [Enter] X
Power control functions are only available on RSM-8R Series units.
In Administrator and SuperUser mode, all ports/plugs are displayed. In User and ViewOnly mode, the status screen will only
display ports/plugs allowed by the account. Note that standard TSM and RSM series units do not include switched plugs.
User and ViewOnly level accounts are only allowed to view parameters for the port that was used to access command mode.
In Administrator mode, all Plug Groups are displayed. In SuperUser, User and ViewOnly modes, the Plug Group Status Screen
will only include the Plug Groups allowed by the account.
If the optional asterisk argument is included in the /J command line, then in addition to the Site ID message, the TSM/RSM will
also display the Model Number, Serial Number, Firmware Version and other information.
User level accounts are only allowed to create a connection to Serial Ports permitted by the account. User level accounts are not
allowed to create Third Party (remote) port connections.
The ",Y" argument can be included to suppress the command confirmation prompt.
In order to invoke this command, Outbound Telnet/SSH and Outbound Service Access must be enabled for your account.
In SuperUser mode, configuration menus can be displayed, but parameters cannot be changed.
Not Available on RSM-8R Series units. On RSM-8R units, Ping No Answer parameters are defined via the Reboot Options Menu.