User`s guide

13-8
Operation via SNMP
• bufferThresholdCrossedSetTrap - Indicates that the amount of data in the
serial port buffer has exceeded the currently defined Buffer Threshold value. The
trap will also include a the number of the port where the Buffer Threshold Alarm was
generated, and a numerical value that indicates the amount of data currently stored
in the port buffer.
• bufferThresholdCrossedClearTrap - Indicates that the data in the port buffer
has either been read or erased and that the Buffer Threshold Alarm has been
cleared.
• circuitBreakerOpenSetTrap - Indicates that the Circuit Breaker Open Alarm
has been triggered.
• circuitBreakerOpenClearTrap - Indicates that the Circuit Breaker Open Alarm
has been cleared.
• lostCommSetTrap - Indicates that the Lost Communication Alarm has been
triggered.
• lostCommClearTrap - Indicates that the Lost Communication Alarm has been
cleared.
• plugCurrentSetTrap - Indicates that the Plug Current Alarm has been triggered.
• plugCurrentClearTrap - Indicates that the Plug Current Alarm has been
cleared.
• lostOptoVoltageSetTrap - Indicates that the Lost Voltage Alarm has been
triggered at a unit that includes opto sensors.
• lostOptoVoltageClearTrap - Indicates that the Lost Voltage Alarm has been
cleared at a unit that includes opto sensors.
• noDialtoneSetTrap - Indicates that the No Dialtone Alarm has been triggered.
• noDialtoneClearTrap - Indicates that the No Dialtone Alarm has been cleared.