User`s guide

10-7
Telnet & SSH Functions
10.3.4. Terminating a Direct Connect Session
To terminate a Direct Connect session, use the client program’s "disconnect" feature.
The following will occur immediately upon a client initiated disconnect:
1. The Network port is disconnected from the serial port.
2. The Network session is terminated.
3. The serial port is put to sleep.
Notes:
• TheSequenceDisconnectCommand,whichisdefinedviathePort
Configurationmenus,cannotbeusedtoterminateaDirectConnection.
• AnyTSM/RSMportthatallowsAdministratororSuperUserlevelcommands
canterminateadirectconnectionatanotherportbyissuingtheText
Interface's/DcommandasdescribedinSection9.1.1.2orviatheWeb
BrowserInterface'sPortControlScreenasdescribedinSection9.1.1.3.
• AcknowledgmentofdatareceivedbytheTSM/RSMnetworkportdoesnot
automaticallyindicatethatthedatahasbeencompletelysentouttheserial
port.DatamaystillbequeuedinTSM/RSMbuffers.Anydataqueuedatthe
timeofaclientinitiateddisconnectisdiscarded,andisnotpassedtothe
attacheddevice.