User`s guide

8-6
The Status Screens
8.5. The Plug Group Status Screen (RSM-8R Series Units Only)
The Plug Group Status screen shows the configuration details and On/Off status for the
RSM-8R Series unit's user-defined Plug Groups.
Notes:
• ThePlugGroupStatusScreenisnotincludedonstandardTSMSeriesunits
andstandardRSMSeriesunits.
• WhenthePlugGroupStatusScreenisviewedbyanaccountwith
AdministratororSuperUsercommandaccess,allplugsandpluggroupscan
beshown.WhenthePlugStatusScreenisviewedbyanaccountwithUser
orViewOnlycommandaccess,thentheunitwillonlydisplaytheplugsand
pluggroupsthatareallowedbythataccount.
• Theprocedurefordefiningparametersforindividualplugsisdescribed
inSection5.7.TheprocedurefordefiningPlugGroupsisdescribedin
Section5.6.
• InordertodisplaythePlugGroupStatusscreen,youmustfirstdefineatleast
onePlugGroupasdescribedinSection5.6.
To display the Plug Group Status Screen via the Text Interface, type /SG and then
press [Enter]. To display the Plug Group Status Screen via the Web Browser Interface,
click on the "Plug Group Status" link and then select the desired Plug Group from the
resulting subment and click on the "Get Plug Group Status" button.
The Plug Group Status Screen lists the following parameters for each Plug Group:
• GroupName: The user-defined name for each Plug Group.
• Plug: The alphanumeric number of each switched outlet in the Plug Group.
• PlugName: (Web Browser Interface Only) The User Defined name for each
switched outlet in the Plug Group.
• Default: The Default On/Off value for each switched outlet in the Plug Group.
• BootSeq.Delay(Delay): The user-defined Boot/Sequence Delay for each
switched outlet in the Plug Group.
• Status: The On/Off status of each switched outlet in the Plug Group. If the Status
column includes an asterisk, this means that this outlet is busy completing another
command, that was previously invoked, either by you or another user.
• SNMPIndex: (Text Interface Only) A permanent reference number that the
TSM/RSM assigns to each Plug Group. The SNMP Index number allows MIB
commands to be addressed to a specific Plug Group. The SNMP Index number will
not change when other Plug Groups are deleted or created.