User`s guide

8-4
The Status Screens
8.4. The Port and Plug Status Screens (RSM-8R Series Units Only)
The Port Status screen and Plug Status screen show the current status of the
RSM-8R Series unit's serial ports and switched plugs. The Port Status screen lists the
user-defined port name and port mode for each serial port, as well as the buffer count,
connection status and the names of any user's currently accessing these ports. The
Plug Status screen shows the On/Off status of the switched outlets, and lists user-
defined Plug Names, Boot/Sequence Delay values, and Default On/Off settings.
Note:
• InstandardTSMSeriesunitsandstandardRSMSeriesunits,PlugStatusis
notlisted.Instead,standardTSMSeriesunitsandstandardRSMSeriesunits
listonlythePortStatus,asdescribedinSection8.3.
• IntheTextInterface,PortandPlugstatusisshownonasinglescreen.When
the/Scommandisinvoked,thePortStatusScreenwillbedisplayedfirst;
press[Enter]todisplaythePlugStatusScreen.
• IntheWebBrowserInterface,PortandPlugstatusisshownontwoseparate
screens.
• WhenPortStatusandPlugStatusisviewedbyanaccountwithAdministrator
orSuperUsercommandaccess,allRSM-8RSeriesunitserialportsandplugs
arelisted.WhenPortStatusandPlugStatusisviewedbyanaccountwith
UserorViewOnlycommandaccess,thenthescreenwilllistonlytheserial
portsandswitchedoutletsthatareallowedbythataccount.
• ThePortandPlugStatusscreensalsodisplaythecurrenttemperature
readingfortheRSM-8RSeriesunit.
• ThePlugStatusscreenalsoshowsthecurrentstatusoftheRSM-8RSeries
unit'sInternalModemPort.
To display the Port and Plug Status Screen via the Text Interface, type /S and press
[Enter]. To display the Port and Plug Status Screen via the Web Browser Interface, click
on the "Port Status" link.
SerialPortStatus: The Port and Plug Status Screen in the Text Interface and the Port
Status Screen in the Web Interface both list the following parameters for the serial ports:
• Port: The number of each serial port.
• Name: The user-defined name for each serial port.
• Username: When a user is connected to a given serial port, this column will show
the name of the user account that initiated the connection.