User`s guide
8-1
8. The Status Screens
The Status Screens are used to display status information about the TSM/RSM serial
ports, switched outlets, Network Port, Plug Groups, Temperature Log, Alarm Log
and Audit Log. The Status Screens are available via both the Text Interface and Web
Browser Interface.
8.1. Product Status
The Product Status Screen lists the model number, power rating and software version
for your local TSM/RSM unit. To display the Product Status Screen via the Text Interface,
type /J * and then press [Enter]. To display the Product Status Screen via the Web
Browser Interface, click on the "Product Status" link. The Product Status Screen lists the
following items:
• Product: The make/model number of the TSM/RSM unit.
• SerialNumber: Displays the serial number for the TSM/RSM unit, providing that
the serial number has been previously defined via the Systems Parameters menu as
described in Section 5.3.
• Rating: (RSM-8R Series Units Only) The current rating, in Amps.
• ModemInstalled: Indicates whether or not the TSM/RSM unit includes an internal
modem.
• SWVersion: The software version that is currently installed on the TSM/RSM unit.
• RAM: The amount of RAM memory installed on the TSM/RSM unit.
• Flash: The Amount of Flash memory installed on the TSM/RSM unit.
• CurrentMonitoring(CurrentSensors): (RSM-8R Series Units Only) This field will
read "Yes" if the RSM-8R Series unit supports current monitoring.
• EnergyWise: (RSM-8R Series Units Only; Web Browser Interface Only) The
supported EnergyWise version number.
Note:TheInformationprovidedbytheProductStatusScreenisintended
mainlytoassistWTIsupportperonnelwhendealingwithserviceissues.