User`s guide

7-10
Alarm Configuration
• NotifyUponClear: When this item is enabled, the RPC will send additional
notification when the situation that caused the alarm has been corrected. For
example, when Notify Upon Clear is enabled, the RPC will send initial notification
when it detects that a Ping command has failed, and then send a second
notification when it determines that the IP address is again responding to the Ping
command. (Default = On.)
• EmailMessage: Enables/Disables email notification for this alarm. (Default = On.)
• Address1,2,and3: These parameters are used to select which of the three email
addresses defined via the "Email Messages" menu (see Section 5.9.11) will receive
the email alarm notification messages generated by this alarm. The Address
parameters can be used to select one, or any combination of the addresses defined
via the Email Messages menu. (Default = All On.)
Note: If Email addresses have been previously specified, then the text under
the parameters will list the current, user defined email addresses.
• Subject: This parameter is used to define the text that will appear in the "Subject"
field for all email notification messages that are generated by this alarm.
(Default = "Alarm: Ping-No-Answer")