User`s guide

5-49

Basic Configuration

• WTI-Group-Access - Determines which circuit group(s) the user will be allowed

to access. The argument for this command includes a character for each, defined

circuit group. The first character in the string is used to represent the first circuit

group defined, and the last character in the string represents the last circuit group

defined. The following options are available for each circuit group:

0 = Off (Deny Access)

1 = On (Allow Access)

For example, to allow access to the first three defined circuit groups out of a total of

six defined circuit groups, the command line would be:

WTI-Group-Access="111000"

Example:

The following command could be used to set the command access level to "User", allow

access to Circuits 1 and 2, and also allow access to the first two of five defined circuit

groups:

tom Auth-Type:=Local, User-Password=="tom1"

User-Name="HARRY-tom",

WTI-Super="1",

WTI-Circuit-Access="11000000",

WTI-Group-Access="11000",