User`s guide

5-48

Basic Configuration

• AccountingPort: The Accounting Port number for the RADIUS function.

(Default = 1813)

• Debug: (Text Interface Only) When enabled, the RPC will put RADIUS debug

information into Syslog. (Default = Off)

• PingTest: Allows you to ping IP addresses or domain names that have been

defined via the RADIUS Parameters menus in order to check that a valid IP address

or domain name has been entered.

Notes:

• In order for the Ping Test feature to function, your network and/or firewall

must be configured to allow ping commands.

• In addition to the Ping Test feature, the /TEST command in the Text Interface

or the "Test" option in the Web Browser Interface can also be used to ping

any user defined IP address in order to make certain that the IP address is

responding.

5.9.10.1. DictionarySupportforRADIUS

The RADIUS dictionary file can allow you to define users and assign command access

rights and circuit access rights from a central location. The RADIUS dictionary file,

"dictionary.wti" is included on the CDROM along with this user's guide. To install the

dictionary file on your RADIUS server, please refer to the documentation provided with

your server; some servers will require the dictionary file to reside in a specific directory

location, others will require the dictionary file to be appended to an existing RADIUS

dictionary file. The WTI RADIUS dictionary file provides the following commands: .

• WTI-Super - Sets the command access level for the user. This command provides

the following arguments:

0 = ViewOnly

1 = User

2 = SuperUser

3 = Administrator

For example, to set the access level to "SuperUser", the command line would be:

WTI-Super="2"

• WTI-Plug-Access - Determines which circuit(s) the user will be allowed to

access. This command provides an argument that consists of a character string,

with one character for each the RPC's switched circuits. The following options are

available:

0 = Off (Deny Access)

1 = On (Allow Access)

For example, to allow access to Circuits 2 and 4, the command line would be:

WTI-Plug-Access="0101"