User`s guide

17-10
Command Reference Guide
/N Network Port Parameters - IPv4
Displays a menu which is used to select IPv4 parameters for the Network Port. Note that
all of the functions provided by the /N command are also available via the Web Browser
Interface. For more information, please refer to Section 5.9.
Availability: Administrator
Format: /N [Enter]
/N6 Network Port Parameters - IPv6
Displays a menu which is used to select IPv6 parameters for the Network Port. Note
that all functions provided by the /N6 command are also available via the Web Browser
Interface. For more information, please refer to Section 5.9.
Availability: Administrator
Format: /N6 [Enter]
/RB Reboot Options
Displays a menu that is used to configure Scheduled Reboots and Ping-No-Answer
Reboots. Scheduled Reboots allow the RPC to be rebooted on a regular basis,
according to a user defined schedule. Ping-No-Answer Reboots allow the RPC to
automatically reboot user-designated circuits when a user-specified IP address does not
respond to a Ping command. For more information on Reboot options, please refer to
Section 6.
Note: If desired, the Ping-No-Answer Reboot function can also be configured
to send email notification whenever a Ping-No-Answer Reboot is generated. For
more information, please refer to Section 7.4.
Availability: Administrator
Format: /RB [Enter]
/AC Alarm Configuration Parameters
Displays a menu that is used to configure and enable the RPC's various alarm functions.
For more information on Alarm Configuration, please refer to Section 7.
Availability: Administrator
Format: /AC [Enter]