User`s guide

17-4
Command Reference Guide
/SN Display Network Status
Displays the Network Status Screen, which lists current network connections to the
RPC's Network Port. For more information, please refer to Section 8.2.
Availability: Administrator, SuperUser, User, ViewOnly
Format: /SN [Enter]
/H Help
Displays a Help Screen, which lists all available Text Interface commands along with a
brief description of each command.
Note: In the Administrator Mode, the Help Screen will list the entire RPC Text
Interface command set. In SuperUser Mode, User Mode and ViewOnly Mode,
the Help Screen will only list the commands that are allowed by the account's
access level.
Availability: Administrator, SuperUser, User, ViewOnly
Format: /H [Enter]
/L Log Functions
Provides access to a menu which allows you to display the Audit Log, Alarm Log and
Temperature Log. For more information on Log Functions, please refer to Section 5.3.3.
Availability: Administrator, SuperUser
Format: /L [Enter]
/J Display Site ID / Unit Information
Displays the user-defined Site I.D. message. If the optional asterisk (*) argument is
included in the command line, the command will also show model numbers, serial
number, software versions and other information for the RPC unit.
Availability: Administrator, SuperUser, User, ViewOnly
Format: /J [*] [Enter]
Where * (asterisk) is an optional command argument, that is used to display the
model number, software version and other information for the RPC unit.