User`s guide

17-2
Command Reference Guide
17.2. Command Summary
Function Command Syntax Command Access Level
Admin. SuperUser User ViewOnly
Display
Circuit Status /S [s] [Enter] X X X X
Circuit Group Status /SG [Enter] X X X X
Network Status /SN [Enter] X X X X
Help Menu /H [Enter] X X X X
Log Functions /L [Enter] X X
Site ID / Unit Information /J [*] [Enter] X X X X
Control
Exit Command Mode /X [Enter] X X X X
Boot Circuit n /BOOT <s>[,Y] [Enter] X X X
Turn Circuit n On /ON <s>[,Y] [Enter] X X X
Turn Circuit n Off /OFF <s>[,Y] [Enter] X X X
Default All Circuits /DPL[,Y] [Enter] X X X
Connect to Port /C [n] [Enter] X X X
Disconnect from Port /D [n][Enter] X X X
Send Parameter File /U [Enter] X
Send SSH Keys /K <k> [Enter] X
Unlock Invalid Access /UL [Enter] X
Configuration
System Parameters /F [Enter] X 
Console Port Parameters /P [n] [Enter] X 
Circuit Parameters /PL [Enter] X 
Circuit Group Parameters /G [Enter] X 
Network Configuration - IPv4 /N [Enter] X 
Network Configuration - IPv6 /N6[Enter] X 
Reboot Options /RB [Enter] X 
Alarm Configuration /AC [Enter] X 
Reboot System /I [Enter] X X
Upgrade Firmware /UF [Enter] X
Test Network Configuration /TEST [Enter] X
 In Administrator Mode and SuperUser Mode, all RPC circuits are displayed. In User Mode
and ViewOnly Mode, the Circuit Status Screen will only include the circuits that are allowed
by your account.
 In Administrator Mode, all Circuit Groups are displayed. In SuperUser Mode, User Mode and
ViewOnly Mode, the Circuit Group Status Screen will only include the Circuit Groups that are
allowed by your account.
 In Administrator Mode, the Help Menus will list all RPC commands. In the SuperUser Mode,
User Mode and ViewOnly Mode, the Help Menus will only list the commands that are allowed
by the access level.
 If the optional asterisk (*) argument is included in the command line, this command will also
show model numbers, software versions and other information for the RPC unit.
 The ",Y" argument can be included in the command line to suppress the command
confirmation prompt.
 In SuperUser Mode, configuration menus can be displayed, but parameters cannot be
changed.