User`s guide

16-3
Upgrading MPC Firmware
8. If you have accessed the RPC via the Network Port, in order to start the FTP/SFTP
servers, the RPC will break the network connection when the system is reinitialized.
• If you initially selected "Start FTP/SFTP Servers and Save Parameters", you may
then reestablish a connection with the RPC using your former IP address.
• If you initially selected "Start FTP/SFTP Servers and Default Parameters", you
must then login using the RPC’s default IP address (Default = 192.168.168.168)
or access command mode via Serial Port 1 or 2 or via Modem.
When firmware upgrades are available, WTI will provide the necessary files. At that time,
an updated Users Guide or addendum will also be available.