User`s guide

13-5
Operation via SNMP
13.6. Sending Traps via SNMP
Traps that report various unit conditions can be sent to an SNMP Management Station
from the RPC. The following traps are currently supported.
• WarmStart Trap – Trap indicating a warm start
• ColdStart Trap – Trap indicating a cold start
• Test Trap – Test trap invoked by user via the Text Interface (CLI.)
• Alarm Trap – Trap indicating an alarm condition. A trap with a unique enterprise
OID is defined for every possible alarm in the system, under which several specific
trap-types are defined to indicate the setting or clearing of that particular alarm
condition.