User`s guide

8-1
8. The Status Screens
The Status Screens are used to display status information about the RPC unit, switched
circuits, Network Port and Circuit Groups. The Status Screens are available via both the
Text Interface and Web Browser Interface.
8.1. Product Status
The Product Status Screen lists the model number, software version and other
information for your RPC unit. To display the Product Status Screen via the Text
Interface, type /J * and then press [Enter]. To display the Product Status Screen
via the Web Browser Interface, click on the "Product Status" link. The Product Status
Screen lists the following items:
• SiteID(Location): A user-defined text string that can be used to denote the
location of the RPC unit. To define the Site ID (Location) message, proceed as
described in Section 5.3.
• Product: The make/model number of the RPC unit.
• SerialNumber: Displays the serial number for the RPC unit, providing that the
serial number has been previously defined via the Systems Parameters menu as
described in Section 5.3
• SWVersion: The software version that is currently installed on the RPC unit.
• RAM: The amount of RAM memory installed on the RPC unit.
• Flash: The Amount of Flash memory installed on the RPC unit.
• Breakers: Indicates whether or not the unit includes circuit breakers or fuses.
• EnergyWise: The supported EnergyWise version number.
Note: The Information provided by the Product Status Screen is intended
mainly to assist WTI support peronnel with the diagnosis of user equipment
problems.