User`s guide
Table Of Contents
- Figure 2.1: VMR Series - Front Panel (Model VMR-16HD20-1 Shown)
- Figure 2.2: VMR Series - Back Panel (Model VMR-16HD20-1 Shown)
- Figure 2.3: NPS Series - Front Panel (Model NPS-16HD20-1 Shown)
- Figure 2.4: NPS Series - Back Panel (Model NPS-16HD20-1 Shown)
- Figure 5.1: Boot Priority Example 1
- Figure 5.2: Boot Priority Example 2
- Figure 9.1: The Help Menu (Administrator Mode; Text Interface - VMR Shown)
- Figure 14.1: Web Access Parameters (Text Interface Only)
- Figure B.1: RS232 SetUp Port Interface
- 1. Introduction
- 2. Unit Description
- 3. Getting Started
- 4. Hardware Installation
- 5. Basic Configuration
- 5.1. Communicating with the VMR or NPS Unit
- 5.2. Configuration Menus
- 5.3. Defining System Parameters
- 5.4. User Accounts
- 5.5. Managing User Accounts
- 5.6. The Plug Group Directory
- 5.7. Defining Plug Parameters
- 5.8. Serial Port Configuration
- 5.9. Network Configuration
- 5.10. Save User Selected Parameters
- 6. Reboot Options
- 7. Alarm Configuration
- 8. The Status Screens
- 9. Operation
- 10. SSH Encryption
- 11. Syslog Messages
- 12. SNMP Traps
- 13. Operation via SNMP
- 14. Setting Up SSL Encryption
- 15. Saving and Restoring Configuration Parameters
- 16. Upgrading VMR/NPS Firmware
- 17. Command Reference Guide
- Appendix A. Specifications
- Appendix B. Interface Descriptions
- Appendix C. Customer Service
- Index
6-6
Reboot Options
• PlugAccess: Determines which outlet(s) this Scheduled Reboot action will be
applied to. In the Text Interface, outlets are selected by typing 9, pressing [Enter]
and then following the instructions in the resulting submenu. In the Web Browser
Interface, outlets are designated by clicking on the "plus" sign in the Plug Access
field, and then selecting the desired outlets from the drop down menu.
(Default = undefined.)
• PlugGroupAccess: Determines which Plug Group(s) this Scheduled Reboot
action will be applied to. Note that in the Text Interface, Plug Group Access is
defined via a separate submenu; in the Web Browser Interface, Plug Group Access
is defined via a drop down menu, which may be accessed by clicking on the "plus"
sign in the Plug Group Access field. (Default = undefined.)
6.2.2. Viewing Scheduled Reboot Actions
After you have defined one or more Scheduled Reboots, you can review the parameters
selected for each Reboot using the View Scheduled Reboot feature. In order to view
the configuration of an existing Scheduled Reboot, you must access the command
mode using a password that allows Administrator level commands and then use the
Scheduled Reboot menu's "View/Modify Scheduled Reboot" function.
The VMR/NPS will display a screen which lists all defined parameters for the selected
Scheduled Reboot action.
6.2.3. Modifying Scheduled Reboots
After you have defined a Scheduled Reboot, you can edit the configuration of the
Reboot action using the Modify Scheduled Reboot feature. In order to modify the
configuration of an existing Scheduled Reboot action, you must access the command
mode using a password that allows Administrator level commands and then use the
Scheduled Reboot menu's "View/Modify Scheduled Reboot" function.
The VMR/NPS will display a screen which allows you to modify parameters for the
selected Scheduled Reboot action. Note that this screen functions identically to the Add
Scheduled Reboot menu, as discussed in Section 6.2.1.
6.2.4. Deleting Scheduled Reboots
After you have defined one or more Scheduled Reboot actions, you can delete Reboot
actions that are no longer needed using the Delete Scheduled Reboot feature. In order
to delete an existing Scheduled Reboot, access the command mode using a password
that allows Administrator level commands and then use the Scheduled Reboot menu's
"Delete Scheduled Reboot" function.