User`s guide

ManualsBrandsWestern Telematic ManualsNetwork CardMPC Series MPC-16H-2

Table Of Contents

Figure 2.1: VMR Series - Front Panel (Model VMR-16HD20-1 Shown)
Figure 2.2: VMR Series - Back Panel (Model VMR-16HD20-1 Shown)
Figure 2.3: NPS Series - Front Panel (Model NPS-16HD20-1 Shown)
Figure 2.4: NPS Series - Back Panel (Model NPS-16HD20-1 Shown)
Figure 5.1: Boot Priority Example 1
Figure 5.2: Boot Priority Example 2
Figure 9.1: The Help Menu (Administrator Mode; Text Interface - VMR Shown)
Figure 14.1: Web Access Parameters (Text Interface Only)
Figure B.1: RS232 SetUp Port Interface
1. Introduction
2. Unit Description
- 2.1. VMR Series - Front Panel
- 2.2. VMR Series - Back Panel
- 2.3. NPS Series - Front Panel
- 2.4. NPS Series - Back Panel
- 2.5. Additional Button Functions
3. Getting Started
- 3.1. Installing the VMR Hardware
  - 3.1.1. Apply Power to the VMR or NPS
  - 3.1.2. Connect your PC to the VMR or NPS
- 3.2. Communicating with the VMR or NPS
4. Hardware Installation
- 4.1. Connecting the Power Supply Cables
  - 4.1.1. Installing the Power Supply Cable Keepers
  - 4.1.2. Connect the VMR or NPS to Your Power Supply
- 4.2. Connection to Switched Outlets
- 4.3. Serial SetUp Port Connection
  - 4.3.1. Connecting a Local PC
  - 4.3.2. Connecting an External Modem
- 4.4. Connecting the Network Cable
- 4.5. Rack Mounting
5. Basic Configuration
- 5.1. Communicating with the VMR or NPS Unit
- 5.2. Configuration Menus
- 5.3. Defining System Parameters
- 5.4. User Accounts
- 5.5. Managing User Accounts
- 5.6. The Plug Group Directory
- 5.7. Defining Plug Parameters
  - 5.7.1. The Boot Priority Parameter
    - 5.7.1.1. Example 1: Change Plug A3 to Priority 1
    - 5.7.1.2. Example 2: Change Plug A5 to Priority 2
- 5.8. Serial Port Configuration
- 5.9. Network Configuration
- 5.10. Save User Selected Parameters
  - 5.10.1. Restore Configuration
6. Reboot Options
- 6.1. Ping-No-Answer Reboot
- 6.2. Scheduled Reboot
7. Alarm Configuration
- 7.1. The Over Current Alarms (VMR Only)
  - 7.1.1. Over Current Alarms - Load Shedding and Auto Recovery
- 7.2. The Over Temperature Alarms
  - 7.2.1. Over Temperature Alarms - Load Shedding and Auto Recovery
- 7.3. The Circuit Breaker Open Alarm
- 7.4. The Lost Voltage (Line In) Alarm
- 7.5. The Ping-No-Answer Alarm
- 7.6. The Invalid Access Lockout Alarm
- 7.7. The Power Cycle Alarm
- 7.8. The Plug Current Alarm (VMR Only)
8. The Status Screens
- 8.1. Product Status
- 8.2. The Network Status Screen
- 8.3. The Plug Status Screen
- 8.4. The Plug Group Status Screen
- 8.5. The Current Metering Status Screen (VMR Only)
- 8.6. The Current History Screen (VMR Only)
- 8.7. The Power Range Status Screen (VMR Only)
- 8.8. The Power History Screen
9. Operation
- 9.1. Operation via the Web Browser Interface
  - 9.1.1. The Plug Control Screen - Web Browser Interface
  - 9.1.2. The Plug Group Control Screen - Web Browser Interface
- 9.2. Operation via the Text Interface
  - 9.2.1. Switching and Reboot Commands - Text Interface
  - 9.2.2. Applying Commands to Several Plugs - Text Interface
- 9.3. The Automated Mode
- 9.4. Manual Operation
- 9.5. Logging Out of Command Mode
10. SSH Encryption
11. Syslog Messages
- 11.1. Configuration
12. SNMP Traps
- 12.1. Configuration:
13. Operation via SNMP
- 13.1. VMR/NPS SNMP Agent
- 13.2. SNMPv3 Authentication and Encryption
- 13.3. Configuration via SNMP
- 13.4. Plug Control via SNMP
  - 13.4.1. Plug Status/Control
  - 13.4.2. Plug Group Status/Control
- 13.5. Viewing VMR/NPS Status via SNMP
  - 13.5.1. Plug Status
  - 13.5.2. Unit Environment Status
- 13.6. Sending Traps via SNMP
14. Setting Up SSL Encryption
- 14.1. Creating a Self Signed Certificate
- 14.2. Creating a Signed Certificate
- 14.3. Downloading the Server Private Key
15. Saving and Restoring Configuration Parameters
- 15.1. Sending Parameters to a File
- 15.2. Restoring Saved Parameters
- 15.3. Restoring Previously Saved Parameters
16. Upgrading VMR/NPS Firmware
- 16.1. Firmware Upgrade Utility (Recommended)
- 16.2. The Upgrade Firmware Function (Alternate Method)
17. Command Reference Guide
- 17.1. Command Conventions
- 17.2. Command Summary
- 17.3. Command Set
Appendix A. Specifications
Appendix B. Interface Descriptions
- B.1. SetUp Port (RS232)
Appendix C. Customer Service
Index

6-1

6. Reboot Options

In addition to performing reboot cycles in response to commands, the VMR and NPS

can also be configured to automatically reboot outlets when an attached device does

not respond to a Ping command (Ping-No-Answer Reboot) or according to a user

defined schedule (Scheduled Reboot.)

• Ping-No-AnswerReboot: When the Ping-No-Answer feature is enabled, the VMR/

NPS will Ping a user selected IP address at regular intervals. If the IP address does

not respond to the Ping command, the VMR/NPS will reboot one or more user

selected outlet(s). Typically, this feature is used to reboot devices when they cease

to respond to the Ping command.

• ScheduledReboot: A scheduled reboot is used to initiate a reboot cycle at a

user selected time and day of the week. When properly configured and enabled,

the VMR/NPS will reboot one or more outlets on a daily or weekly basis. The

Scheduled Reboot feature can also be used to switch outlet(s) Off at a user

selected time, and then switch them back On again at a later, user selected time.

This section describes the procedure for configuring and enabling Ping-No-Answer

Reboots and Scheduled Reboots.

Note: When defining parameters via the Text Interface, make certain to press

the [Esc] key to completely exit from the configuration menus and save newly

defined parameters. When parameters are defined via the Text Interface, newly

defined parameters will not be saved until the "Saving Configuration" message is

displayed.