User`s guide

ManualsBrandsWestern Telematic ManualsNetwork CardMPC Series MPC-16H-2

Table Of Contents

Figure 2.1: VMR Series - Front Panel (Model VMR-16HD20-1 Shown)
Figure 2.2: VMR Series - Back Panel (Model VMR-16HD20-1 Shown)
Figure 2.3: NPS Series - Front Panel (Model NPS-16HD20-1 Shown)
Figure 2.4: NPS Series - Back Panel (Model NPS-16HD20-1 Shown)
Figure 5.1: Boot Priority Example 1
Figure 5.2: Boot Priority Example 2
Figure 9.1: The Help Menu (Administrator Mode; Text Interface - VMR Shown)
Figure 14.1: Web Access Parameters (Text Interface Only)
Figure B.1: RS232 SetUp Port Interface
1. Introduction
2. Unit Description
- 2.1. VMR Series - Front Panel
- 2.2. VMR Series - Back Panel
- 2.3. NPS Series - Front Panel
- 2.4. NPS Series - Back Panel
- 2.5. Additional Button Functions
3. Getting Started
- 3.1. Installing the VMR Hardware
  - 3.1.1. Apply Power to the VMR or NPS
  - 3.1.2. Connect your PC to the VMR or NPS
- 3.2. Communicating with the VMR or NPS
4. Hardware Installation
- 4.1. Connecting the Power Supply Cables
  - 4.1.1. Installing the Power Supply Cable Keepers
  - 4.1.2. Connect the VMR or NPS to Your Power Supply
- 4.2. Connection to Switched Outlets
- 4.3. Serial SetUp Port Connection
  - 4.3.1. Connecting a Local PC
  - 4.3.2. Connecting an External Modem
- 4.4. Connecting the Network Cable
- 4.5. Rack Mounting
5. Basic Configuration
- 5.1. Communicating with the VMR or NPS Unit
- 5.2. Configuration Menus
- 5.3. Defining System Parameters
- 5.4. User Accounts
- 5.5. Managing User Accounts
- 5.6. The Plug Group Directory
- 5.7. Defining Plug Parameters
  - 5.7.1. The Boot Priority Parameter
    - 5.7.1.1. Example 1: Change Plug A3 to Priority 1
    - 5.7.1.2. Example 2: Change Plug A5 to Priority 2
- 5.8. Serial Port Configuration
- 5.9. Network Configuration
- 5.10. Save User Selected Parameters
  - 5.10.1. Restore Configuration
6. Reboot Options
- 6.1. Ping-No-Answer Reboot
- 6.2. Scheduled Reboot
7. Alarm Configuration
- 7.1. The Over Current Alarms (VMR Only)
  - 7.1.1. Over Current Alarms - Load Shedding and Auto Recovery
- 7.2. The Over Temperature Alarms
  - 7.2.1. Over Temperature Alarms - Load Shedding and Auto Recovery
- 7.3. The Circuit Breaker Open Alarm
- 7.4. The Lost Voltage (Line In) Alarm
- 7.5. The Ping-No-Answer Alarm
- 7.6. The Invalid Access Lockout Alarm
- 7.7. The Power Cycle Alarm
- 7.8. The Plug Current Alarm (VMR Only)
8. The Status Screens
- 8.1. Product Status
- 8.2. The Network Status Screen
- 8.3. The Plug Status Screen
- 8.4. The Plug Group Status Screen
- 8.5. The Current Metering Status Screen (VMR Only)
- 8.6. The Current History Screen (VMR Only)
- 8.7. The Power Range Status Screen (VMR Only)
- 8.8. The Power History Screen
9. Operation
- 9.1. Operation via the Web Browser Interface
  - 9.1.1. The Plug Control Screen - Web Browser Interface
  - 9.1.2. The Plug Group Control Screen - Web Browser Interface
- 9.2. Operation via the Text Interface
  - 9.2.1. Switching and Reboot Commands - Text Interface
  - 9.2.2. Applying Commands to Several Plugs - Text Interface
- 9.3. The Automated Mode
- 9.4. Manual Operation
- 9.5. Logging Out of Command Mode
10. SSH Encryption
11. Syslog Messages
- 11.1. Configuration
12. SNMP Traps
- 12.1. Configuration:
13. Operation via SNMP
- 13.1. VMR/NPS SNMP Agent
- 13.2. SNMPv3 Authentication and Encryption
- 13.3. Configuration via SNMP
- 13.4. Plug Control via SNMP
  - 13.4.1. Plug Status/Control
  - 13.4.2. Plug Group Status/Control
- 13.5. Viewing VMR/NPS Status via SNMP
  - 13.5.1. Plug Status
  - 13.5.2. Unit Environment Status
- 13.6. Sending Traps via SNMP
14. Setting Up SSL Encryption
- 14.1. Creating a Self Signed Certificate
- 14.2. Creating a Signed Certificate
- 14.3. Downloading the Server Private Key
15. Saving and Restoring Configuration Parameters
- 15.1. Sending Parameters to a File
- 15.2. Restoring Saved Parameters
- 15.3. Restoring Previously Saved Parameters
16. Upgrading VMR/NPS Firmware
- 16.1. Firmware Upgrade Utility (Recommended)
- 16.2. The Upgrade Firmware Function (Alternate Method)
17. Command Reference Guide
- 17.1. Command Conventions
- 17.2. Command Summary
- 17.3. Command Set
Appendix A. Specifications
Appendix B. Interface Descriptions
- B.1. SetUp Port (RS232)
Appendix C. Customer Service
Index

5-10

Basic Configuration

5.3.3. Log Configuration

This feature allows you to create records of command activity, alarm actions,

temperature readings and current and power consumption for the VMR/NPS unit. The

Log features are enabled and configured via the System Parameters Menus.

• AuditLog: Creates a record of all power switching at the VMR/NPS unit, including

reboots and switching caused by Load Shedding, Load Shedding Recovery,

Ping No Answer Reboots and Scheduled Reboots. Each Log record includes a

description of the activity that caused the power switching, the username for the

account that initiated the power switching or reboot and the time and date that the

power switching or reboot occurred. In addition to power switching activity, the

Audit Log will also include login/logout activity for each user account.

• AlarmLog: Creates a record of all Alarm Activity at the VMR or NPS unit. Each

time an alarm is triggered, the VMR or NPS will generate a record that lists the time

and date of the alarm, the name of the Alarm that was triggered, and a description

of the Alarm.

• TemperatureLog: (NPS Only) The Temperature Log provides a record of

temperature levels over time at the NPS unit. Each Log record will include the time

and date, and the temperature reading.

• CurrentMeteringLog: (VMR Only) Provides a record of current consumption.

Log records will include the time and date, current and voltage readings and

temperature readings. Current Metering Log data can be downloaded in ASCII,

CSV or XML format.

Notes:

• Current and Power Metering functions are not available on NPS units.

• In VMR units, temperature data is included in the Current History Log. In NPS

Units, a separate Temperature Log is included to display temperature data.