User`s guide

ManualsBrandsWestern Telematic ManualsNetwork CardMPC Series MPC-16H-2

Table Of Contents

Figure 2.1: VMR Series - Front Panel (Model VMR-16HD20-1 Shown)
Figure 2.2: VMR Series - Back Panel (Model VMR-16HD20-1 Shown)
Figure 2.3: NPS Series - Front Panel (Model NPS-16HD20-1 Shown)
Figure 2.4: NPS Series - Back Panel (Model NPS-16HD20-1 Shown)
Figure 5.1: Boot Priority Example 1
Figure 5.2: Boot Priority Example 2
Figure 9.1: The Help Menu (Administrator Mode; Text Interface - VMR Shown)
Figure 14.1: Web Access Parameters (Text Interface Only)
Figure B.1: RS232 SetUp Port Interface
1. Introduction
2. Unit Description
- 2.1. VMR Series - Front Panel
- 2.2. VMR Series - Back Panel
- 2.3. NPS Series - Front Panel
- 2.4. NPS Series - Back Panel
- 2.5. Additional Button Functions
3. Getting Started
- 3.1. Installing the VMR Hardware
  - 3.1.1. Apply Power to the VMR or NPS
  - 3.1.2. Connect your PC to the VMR or NPS
- 3.2. Communicating with the VMR or NPS
4. Hardware Installation
- 4.1. Connecting the Power Supply Cables
  - 4.1.1. Installing the Power Supply Cable Keepers
  - 4.1.2. Connect the VMR or NPS to Your Power Supply
- 4.2. Connection to Switched Outlets
- 4.3. Serial SetUp Port Connection
  - 4.3.1. Connecting a Local PC
  - 4.3.2. Connecting an External Modem
- 4.4. Connecting the Network Cable
- 4.5. Rack Mounting
5. Basic Configuration
- 5.1. Communicating with the VMR or NPS Unit
- 5.2. Configuration Menus
- 5.3. Defining System Parameters
- 5.4. User Accounts
- 5.5. Managing User Accounts
- 5.6. The Plug Group Directory
- 5.7. Defining Plug Parameters
  - 5.7.1. The Boot Priority Parameter
    - 5.7.1.1. Example 1: Change Plug A3 to Priority 1
    - 5.7.1.2. Example 2: Change Plug A5 to Priority 2
- 5.8. Serial Port Configuration
- 5.9. Network Configuration
- 5.10. Save User Selected Parameters
  - 5.10.1. Restore Configuration
6. Reboot Options
- 6.1. Ping-No-Answer Reboot
- 6.2. Scheduled Reboot
7. Alarm Configuration
- 7.1. The Over Current Alarms (VMR Only)
  - 7.1.1. Over Current Alarms - Load Shedding and Auto Recovery
- 7.2. The Over Temperature Alarms
  - 7.2.1. Over Temperature Alarms - Load Shedding and Auto Recovery
- 7.3. The Circuit Breaker Open Alarm
- 7.4. The Lost Voltage (Line In) Alarm
- 7.5. The Ping-No-Answer Alarm
- 7.6. The Invalid Access Lockout Alarm
- 7.7. The Power Cycle Alarm
- 7.8. The Plug Current Alarm (VMR Only)
8. The Status Screens
- 8.1. Product Status
- 8.2. The Network Status Screen
- 8.3. The Plug Status Screen
- 8.4. The Plug Group Status Screen
- 8.5. The Current Metering Status Screen (VMR Only)
- 8.6. The Current History Screen (VMR Only)
- 8.7. The Power Range Status Screen (VMR Only)
- 8.8. The Power History Screen
9. Operation
- 9.1. Operation via the Web Browser Interface
  - 9.1.1. The Plug Control Screen - Web Browser Interface
  - 9.1.2. The Plug Group Control Screen - Web Browser Interface
- 9.2. Operation via the Text Interface
  - 9.2.1. Switching and Reboot Commands - Text Interface
  - 9.2.2. Applying Commands to Several Plugs - Text Interface
- 9.3. The Automated Mode
- 9.4. Manual Operation
- 9.5. Logging Out of Command Mode
10. SSH Encryption
11. Syslog Messages
- 11.1. Configuration
12. SNMP Traps
- 12.1. Configuration:
13. Operation via SNMP
- 13.1. VMR/NPS SNMP Agent
- 13.2. SNMPv3 Authentication and Encryption
- 13.3. Configuration via SNMP
- 13.4. Plug Control via SNMP
  - 13.4.1. Plug Status/Control
  - 13.4.2. Plug Group Status/Control
- 13.5. Viewing VMR/NPS Status via SNMP
  - 13.5.1. Plug Status
  - 13.5.2. Unit Environment Status
- 13.6. Sending Traps via SNMP
14. Setting Up SSL Encryption
- 14.1. Creating a Self Signed Certificate
- 14.2. Creating a Signed Certificate
- 14.3. Downloading the Server Private Key
15. Saving and Restoring Configuration Parameters
- 15.1. Sending Parameters to a File
- 15.2. Restoring Saved Parameters
- 15.3. Restoring Previously Saved Parameters
16. Upgrading VMR/NPS Firmware
- 16.1. Firmware Upgrade Utility (Recommended)
- 16.2. The Upgrade Firmware Function (Alternate Method)
17. Command Reference Guide
- 17.1. Command Conventions
- 17.2. Command Summary
- 17.3. Command Set
Appendix A. Specifications
Appendix B. Interface Descriptions
- B.1. SetUp Port (RS232)
Appendix C. Customer Service
Index

Warnings and Cautions:

Installation Instructions

Secure Racking

If Secure Racked units are installed in a closed or multi-unit rack assembly, they may

require further evaluation by Certification Agencies. The following items must be

considered.

1. The ambient within the rack may be greater than room ambient. Installation

should be such that the amount of air flow required for safe operation is not

compromised. The maximum temperature for the equipment in this environment is

55°C. Consideration should be given to the maximum rated ambient.

2. Installation should be such that a hazardous stability condition is not achieved due

to uneven loading.

3. Side vents are used to dissipate heat generated within the unit. When mounting

the unit in an equipment rack, make certain to allow adequate clearance for

venting.

Input Supply

Check nameplate ratings to assure there is no overloading of supply circuits that could

have an effect on overcurrent protection and supply wiring.

Grounding

Reliable earthing of this equipment must be maintained. Particular attention should

be given to supply connections when connecting to power strips, rather than direct

connections to the branch circuit.

No Serviceable Parts Inside; Authorized Service Personnel Only

Do not attempt to repair or service this device yourself. Internal components must be

serviced by authorized personnel only.

• ShockHazard-DoNotEnter

• LithiumBattery

CAUTION:Dangerofexplosionifbatteryisincorrectlyreplaced.Replace

onlywithsameorequivalenttyperecommendedbythemanufacturer.

Discardusedbatteriesaccordingtothemanufacturer'sinstructions.