User`s guide
Table Of Contents
- Figure 2.1: VMR Series - Front Panel (Model VMR-16HD20-1 Shown)
- Figure 2.2: VMR Series - Back Panel (Model VMR-16HD20-1 Shown)
- Figure 2.3: NPS Series - Front Panel (Model NPS-16HD20-1 Shown)
- Figure 2.4: NPS Series - Back Panel (Model NPS-16HD20-1 Shown)
- Figure 5.1: Boot Priority Example 1
- Figure 5.2: Boot Priority Example 2
- Figure 9.1: The Help Menu (Administrator Mode; Text Interface - VMR Shown)
- Figure 14.1: Web Access Parameters (Text Interface Only)
- Figure B.1: RS232 SetUp Port Interface
- 1. Introduction
- 2. Unit Description
- 3. Getting Started
- 4. Hardware Installation
- 5. Basic Configuration
- 5.1. Communicating with the VMR or NPS Unit
- 5.2. Configuration Menus
- 5.3. Defining System Parameters
- 5.4. User Accounts
- 5.5. Managing User Accounts
- 5.6. The Plug Group Directory
- 5.7. Defining Plug Parameters
- 5.8. Serial Port Configuration
- 5.9. Network Configuration
- 5.10. Save User Selected Parameters
- 6. Reboot Options
- 7. Alarm Configuration
- 8. The Status Screens
- 9. Operation
- 10. SSH Encryption
- 11. Syslog Messages
- 12. SNMP Traps
- 13. Operation via SNMP
- 14. Setting Up SSL Encryption
- 15. Saving and Restoring Configuration Parameters
- 16. Upgrading VMR/NPS Firmware
- 17. Command Reference Guide
- Appendix A. Specifications
- Appendix B. Interface Descriptions
- Appendix C. Customer Service
- Index
Index-8
Index
SetUp Port 2-1, 2-3
Accept Break 5-27
Administrator Mode 5-27
Baud Rate 5-27
Bits and Parity 5-27
Command Echo 5-27
DTR Output 5-28
Handshake Mode 5-27
Hang-Up String 5-28
Inactivity Timeout 5-27
Initialization String 5-28
Logoff Character 5-27
Modem Mode 5-28
Periodice Reset Value 5-28
Port Mode 5-28
Port Name 5-28
Reset String 5-28
Sequence Disconnect 5-27
Stop Bits 5-27
SetUp Port Configuration 5-27 to 5-29
Signed Certificate 14-1 to 14-3
Site I.D. 5-5
Text Interface 17-4
SMTP Server 5-46
SNMP 13-1 to 13-7
Adding Users 13-3
Configuration 12-1
Configuration Via 13-2 to 13-3
Controlling Plug Groups 13-5
Controlling Plugs 13-4
Deleting Users 13-3
Modifying Users 13-3
Operation via 13-1
Ping Test 5-38
SNMP Traps 12-1
Viewing Users 13-3
View Unit Status 13-6
SNMP Agent 13-1
SNMP Index 8-4
SNMP Parameters 5-36 to 5-41
Access 5-20
Authentication 5-37
Authentication Protocol 5-37
Enable 5-36
Privacy 5-37
Read Only 5-36
Read Only Community 5-37
Read/Write Community 5-37
SNMP Contact 5-37
SNMP Location 5-37
SNMPv3 5-36 to 5-41
SNMPv3 Password 5-37
SNMPv3 User Name 5-37
Version 5-36
SNMP Trap
SNMP Managers 5-38
Trap Community 5-38
SNMPv3 5-36 to 5-41
Authentication 13-1
Authentication/Privacy 5-37
Authentication Protocol 5-37
Encryption 13-1
Password 5-37
Username 5-37
Specifications Apx-1
SSH 5-2
Access 5-20
Encryption 10-1
Keys 10-1, 17-8
SSH Access 5-31
SSH Port 5-31
SSL Certificate 14-1 to 14-3
Common Name 14-2
Country 14-2
Create CSR 14-3
Email Address 14-2
Locality 14-2
Organizational Name 14-2
Organizational Unit 14-2
State or Province 14-2
Upload Signed Certificate 14-4
State or Province 14-2
Static Route 5-36
Status Indicators 2-1, 2-3
Status Screens 8-1 to 8-9
Stop Bits
SetUp Port 5-27
Subject
Circuit Breaker Open Alarm 7-9
Invalid Access Lockout Alarm 7-14
Lost Voltage Alarm 7-11
Over Current Alarms 7-4
Over Temperature Alarms 7-7
Ping-No-Answer Alarm 7-12
Plug Current Alarm 7-18
Power Cycle Alarm 7-15
Subnet Mask
Network Port 5-31
SuperUser 5-17, 5-18, 17-2
Network Port 5-30
Supervisor Mode 5-27
Supervisor Mode
Console Port 5-27
Network Port 5-30
Support Apx-3
Sure Prompt 9-5
Switched Outlets 4-2, 2-2, 2-4
Switching Outlets Off
Text Interface 9-4
Web Browser Interface 9-1