User`s guide
Table Of Contents
- Figure 2.1: VMR Series - Front Panel (Model VMR-16HD20-1 Shown)
- Figure 2.2: VMR Series - Back Panel (Model VMR-16HD20-1 Shown)
- Figure 2.3: NPS Series - Front Panel (Model NPS-16HD20-1 Shown)
- Figure 2.4: NPS Series - Back Panel (Model NPS-16HD20-1 Shown)
- Figure 5.1: Boot Priority Example 1
- Figure 5.2: Boot Priority Example 2
- Figure 9.1: The Help Menu (Administrator Mode; Text Interface - VMR Shown)
- Figure 14.1: Web Access Parameters (Text Interface Only)
- Figure B.1: RS232 SetUp Port Interface
- 1. Introduction
- 2. Unit Description
- 3. Getting Started
- 4. Hardware Installation
- 5. Basic Configuration
- 5.1. Communicating with the VMR or NPS Unit
- 5.2. Configuration Menus
- 5.3. Defining System Parameters
- 5.4. User Accounts
- 5.5. Managing User Accounts
- 5.6. The Plug Group Directory
- 5.7. Defining Plug Parameters
- 5.8. Serial Port Configuration
- 5.9. Network Configuration
- 5.10. Save User Selected Parameters
- 6. Reboot Options
- 7. Alarm Configuration
- 8. The Status Screens
- 9. Operation
- 10. SSH Encryption
- 11. Syslog Messages
- 12. SNMP Traps
- 13. Operation via SNMP
- 14. Setting Up SSL Encryption
- 15. Saving and Restoring Configuration Parameters
- 16. Upgrading VMR/NPS Firmware
- 17. Command Reference Guide
- Appendix A. Specifications
- Appendix B. Interface Descriptions
- Appendix C. Customer Service
- Index
Index-7
Index
Read Only
SNMP Parameters 5-36
Real Power 5-14
Real Time Clock 5-5, 5-7 to 5-8
Date 5-7
NTP Enable 5-7
NTP Timeout 5-8
Primary NTP Address 5-8
Secondary NTP Address 5-8
Test NTP Servers 5-8, 5-40, 5-43, 5-44
Time 5-7
Time Zone 5-7
Reboot Action 6-3
Reboot Operating System 2-5
Reboot Options 6-1 to 6-6
Ping-No-Answer Reboot 6-2
Scheduled Reboot 6-5
Text Interface 17-10
Reboot Priority 5-24 to 5-26
Reboot System 5-47, 15-3, 17-10
Resend Delay
Circuit Breaker Open Alarm 7-9
Invalid Access Lockout Alarm 7-13
Lost Voltage Alarm 7-10
Over Current Alarms 7-3
Over Temperature Alarms 7-7
Ping-No-Answer Alarm 7-12
Plug Current Alarm 7-17
Reset Button 2-1, 2-3, 2-5
Reset String
Modem Mode 5-28
SetUp Port 5-28
Restore Configuration 5-47, 15-3
Restoring Parameters 15-2, 15-3
Retries
RADIUS 5-44
RS232 Port
Interface Apx-2
RSA Client 10-1
S
Safety Information i to ii
Saving Parameters 15-1
Text Interface 17-8
Scheduled Reboot 6-5 to 6-6
Deleting 6-6
Modifying 6-6
Plug Access 6-6
Plug Action 6-5
Plug Group Access 6-6
Scheduled Reboot Name 6-5
Time 6-5
Viewing 6-6
Scheduled Reboots
Day Access 6-5
Scripting Options 5-15
Automated Mode 5-15
Command Confirmation 5-15
Command Prompt 5-15
IPS Mode 5-15
Search Bind DN 5-39
Search Pind Password 5-39
Secondary Address
RADIUS 5-44
TACACS 5-42
Secondary Host 5-39
Secondary NTP Address 5-8
Secondary Secret Word
RADIUS 5-44
Secret
Energywise Configuration 5-7
Secret Word
RADIUS 5-44
TACACS 5-42
Self Signed Certificate 14-1 to 14-3
Send Test Email 5-46
Sequence Disconnect
Network Port 5-30
SetUp Port 5-27
Serial Number 8-1
Define 5-7
Display 8-1
Serial Port 2-1, 2-3
Accept Break 5-27
Access 5-20
Administrator Mode 5-27
Baud Rate 5-27
Bits and Parity 5-27
Command Echo 5-27
Configuration 5-27 to 5-30
Handshake Mode 5-27
Inactivity Timeout 5-27
Interface Apx-2
Logoff Character 5-27
Modem Mode 5-28
Normal Mode 5-28
Port Mode 5-28
Port Name 5-28
Sequence Disconnect 5-27
Stop Bits 5-27
Serial Port Access 5-18
Serial Port Configuration 5-27 to 5-31
Server Private Key 14-4
Service Access 5-20
LDAP Group 5-40
TACACS 5-43
Set Parameters to Defaults 2-5
Set Plugs to Defaults
Text Interface 9-5, 17-7