User`s guide
Table Of Contents
- Figure 2.1: VMR Series - Front Panel (Model VMR-16HD20-1 Shown)
- Figure 2.2: VMR Series - Back Panel (Model VMR-16HD20-1 Shown)
- Figure 2.3: NPS Series - Front Panel (Model NPS-16HD20-1 Shown)
- Figure 2.4: NPS Series - Back Panel (Model NPS-16HD20-1 Shown)
- Figure 5.1: Boot Priority Example 1
- Figure 5.2: Boot Priority Example 2
- Figure 9.1: The Help Menu (Administrator Mode; Text Interface - VMR Shown)
- Figure 14.1: Web Access Parameters (Text Interface Only)
- Figure B.1: RS232 SetUp Port Interface
- 1. Introduction
- 2. Unit Description
- 3. Getting Started
- 4. Hardware Installation
- 5. Basic Configuration
- 5.1. Communicating with the VMR or NPS Unit
- 5.2. Configuration Menus
- 5.3. Defining System Parameters
- 5.4. User Accounts
- 5.5. Managing User Accounts
- 5.6. The Plug Group Directory
- 5.7. Defining Plug Parameters
- 5.8. Serial Port Configuration
- 5.9. Network Configuration
- 5.10. Save User Selected Parameters
- 6. Reboot Options
- 7. Alarm Configuration
- 8. The Status Screens
- 9. Operation
- 10. SSH Encryption
- 11. Syslog Messages
- 12. SNMP Traps
- 13. Operation via SNMP
- 14. Setting Up SSL Encryption
- 15. Saving and Restoring Configuration Parameters
- 16. Upgrading VMR/NPS Firmware
- 17. Command Reference Guide
- Appendix A. Specifications
- Appendix B. Interface Descriptions
- Appendix C. Customer Service
- Index
Index-1
Index
A
Accept Break
Network Port 5-30
SetUp Port 5-27 to 5-28
Access Level 5-17, 5-19, 17-2
LDAP Group 5-40
TACACS 5-42
Accounting Port
RADIUS 5-44
Add
LDAP Group 5-40
Plug Groups 5-23
User Accounts 5-19
Via SNMP 13-3
Address
Circuit Breaker Open Alarm 7-9
Invalid Access Lockout Alarm 7-14
Lost Voltage Alarm 7-11
Over Current Alarms 7-3
Over Temperature Alarms 7-7
Ping-No-Answer Alarm 7-12
Plug Current Alarm 7-18
Power Cycle Alarm 7-15
Administrator 5-17, 5-18, 17-2
Supervisor Mode 5-27
Administrator Mode
Network Port 5-30
SetUp Port 5-27
Agency Approvals iii
Alarm Clear Threshold
Over Current Alarms 7-3
Over Temperature Alarm 7-7
Alarm Configuration 7-1 to 7-18, 17-10
Over Current Alarms 7-2 to 7-4
Over Temperature Alarms 7-6 to 7-8
Alarm Indicator Lights 2-2, 2-4
Alarm Log 5-6, 5-10 to 5-11
Alarm Set Threshold
Over Current Alarms 7-3
Over Temperature Alarm 7-6
Allow List 5-34
Asterisk Character
Plug Control Screen 9-1
Plug Group Status Screen 8-4
Plug Status Screen 8-3, 9-4
Audit Log 5-6, 5-10 to 5-11
Authentication
SNMPv3 5-37
Authentication Port
RADIUS 5-44
TACACS 5-42
Authentication Protocol
SNMPv3 5-37
Authentication Type 5-46
Automated Mode 5-15, 5-16
Auto Recovery 7-4 to 7-8, 7-7 to 7-8
Over Current Alarms 7-5
B
Basic Configuration 5-1 to 5-47
Baud Rate
SetUp Port 5-27
Bind Type 5-39
Bits and Parity
SetUp Port 5-27
BlackBerry 5-3
BOOT Command
Text Interface 17-5
Boot Priority 5-24 to 5-26
Boot/Sequence Delay 5-24
Branch Current Usage 2-1
Button Functions 2-5
C
Cable Keepers 4-1 to 4-2
Callback Security 5-6, 5-13 to 5-14
Callback Attempts 5-14
Callback Delay 5-14
Callback Enable 5-13
Callback Number 5-21
Certificate Signing Request 14-3 to 14-4
Circuit Breaker 8-1
Circuit Breaker Open Alarm 7-9 to 7-10
Address 7-9
Email Message 7-9
Notify Upon Clear 7-9
Resend Delay 7-9
Subject 7-9
Circuit Breakers
NPS Units 2-3
VMR Units 2-1
Clock and Calendar 5-5, 5-7 to 5-8
Command Access Level 5-19, 17-2
Command Confirmation 5-15
Command Echo
Network Port 5-30
SetUp Port 5-27
Command Mode
Access 5-1 to 5-3
Logging Out 9-7, 17-5