User`s manual

Western Reserve Controls WRC-CANR-DF-DN User’s Manual
PUB 14.1 Series 3
5
3. General Specifications
Product: WRC-CANR-DF-DN, Series 3 CAN-Bus Extender and Fiber Optic Converter
Description: Electrical Extender to extend the cable distances of CAN-based protocol products
and convert the copper network to a fiber optic link.
Device Type: Communications Extender
Product Revision: 3.??
DeviceNet Conformance: Designed to conform to the ODVA DeviceNet Specification Volume I,
Version 2.0 and Volume II, Version 2.0.
Baud rate: 125K, 250K, 500K and 1M baud fixed or auto-detect baud rate
Address selection: Not applicable
Bus Connection: Used On Device: Woodhead # 1R5006A17A120, male pins, male threads
CAN-Bus Cable: See accessories list
Fiber Optic Cable: 62.5/125nm, multi-mode, ST termination
Fiber Cable Length: 2200 meters (max)
Fiber Connection: Used On Device: ST female
Fiber Cable: ST male
Status Indicators: MS - Module Status: green/red bi-color LED
NSA - Copper Network A Status: green/red bi-color LED
NSB - Fiber Network B Status: green/red bi-color LED
DGN - Diagnostic Data: green/red bi-color LED
TXF - Fiber Transmit Active: green LED
RXF - Fiber Receive Active: green LED
Voltage Isolation: Provided by fiber cable system
Maximum power: Voltage: 11 - 25 Vdc
Current: 160 mA @ 11 Vdc - 70 mA @ 25 Vdc
Power: 1.8 W
Mounting: Panel-mount, 4 screws
Size: Length: 5.11” (130 mm)
Depth: 2.27” (57,7 mm)
Height: 3.70” (94,0 mm)
Operating Temp: 0-70 ºC
Humidity: 0-95% RH, non-condensing