User`s manual

Western Reserve Controls WRC-CANR-DF-DN User’s Manual
PUB 14.2 Series 4
12
Figure 4-3
SDS
Mini Connector
Pin # Function Wire color
1 Drain Bare
2 V+ Brown
3 GND Blue
4 CAN_H Black
5 CAN_L White
Table 4-10 SDS cable specifications
4.5.4. Alternate Connector Options
Cable sets may be purchased from an appropriate vendor or custom-made. Turck supplies
individual connectors that may be used to build custom DeviceNet or SDS copper cables. Turck part
number B 4151-0/16 is a 5-pin, 600V, 9A connector that mates with a number of cables that may be used
for the Network A side on the CANR. Contact WRC or your local Turck dealer.
4.6. Fiber Cable
The WRC-CANR-DF-DN employs fiber optic driver and receiver that are capable of operating 50/125
µ
m,
62.5/125
µ
m, 100/140
µ
m, and 200
µ
m multi-mode cable a distance of 2200 meters. They use ST
connectors. The Series 4 WRC-CANR-DF-SM can operate with 9/125
µ
m single mode fiber optic cable.
Two fiber cables are required. Each fiber cable is connected between TX of one CANR and RX of
the other.
For custom applications using different fiber cable technology, contact WRC.