User`s manual

Western Reserve Controls WRC-CANR-DF-DN User’s Manual
PUB 14.2 Series 4
5
3. General Specifications
Product
: WRC-CANR-DF-DN and WRC-CANR-DF-SM, Series 4 CAN-Bus Extender and
Fiber Optic Converter
Description
: Electrical Extender to extend the cable distances of CAN-based protocol products
and convert the copper network to a fiber optic link.
Device Type
: Communications Extender
Product Revision
: 4.1
DeviceNet Conformance
: Designed to conform to the ODVA DeviceNet Specification Volume I, Version
2.0 and Volume II, Version 2.0.
Baud rate
: 9.6K, 10K, 20K, 40K, 50K, 100K 125K, 250K, 500K, 800K and 1M baud fixed or
auto-detect baud rate on DeviceNet
Address selection
: Not applicable
Bus Connection
: Used On Device: Woodhead # 1R5006A17A120, male pins, male threads
CAN-Bus Cable: See accessories list
Fiber Optic Cable
: For WRC-CANR-DF-DN: 50/125
µ
m, 62.5/125
µ
m, 100/140
µ
m, and 200
µ
m, multi-
mode, ST termination
For WRC-CANR-DF-SM: 9/125
µ
m single mode, ST termination
Fiber Cable Length
: 2200 meters (max)
Fiber Connection
: Used On Device: ST female
Fiber Cable: ST male
Status Indicators
: MS - Module Status: green/red bi-color LED
NSA - Copper Network A Status: green/red bi-color LED
NSB - Fiber Network B Status: green/red bi-color LED
DGN - Diagnostic Data: green/red bi-color LED
TXF - Fiber Transmit Active: green LED
RXF - Fiber Receive Active: green LED
Voltage Isolation
: Provided by fiber cable system
Maximum power
: Voltage: 11 - 25 Vdc
Current: 110 mA @ 11 Vdc - 60 mA @ 25 Vdc
Power: 1.5 W
Mounting
: Panel-mount, 4 screws
Size
: Length: 5.11” (130 mm)
Depth: 2.27” (57.7 mm)
Height: 3.70” (94.0 mm)
Operating Temp
: 0-70 ºC
Humidity
: 0-95% RH, non-condensing