User`s manual

Western Reserve Controls 1782-JDM User’s Manual
PUB 24.0
8
3 Hardware Installation and Configuration
3.1 Overview
The ASCII contains two LEDs to indicate the status of the device and the status of the network. The
device can be connected to the main DeviceNet trunk line or to a drop line via screw terminations on the
open, pluggable 5-pin DeviceNet connector supplied with your unit. The serial link, RS232 or RS485, is
connected via an open, pluggable 3-pin connector.
NS
MS
A
D
D
R
E
S
S
V+
CAN_H
N/C
CAN_L
V -
SG+
SG -
GND
S+
S-
G
1782-JDM
Modbus
CONVERTER
DeviceNet
0=RIGHT
1=LEFT
SELECT
ADDRESS
63=ADDR
1
2
4
8
16
32
36=ADDR
0
0
4
0
0
32
9=ADDR
1
0
0
8
0
0
3.11(79)
3.540 (89.9)
0.984 (25)
0.394
(10)
2.920 (74.2) 0.160 (4.1)
Figure 3-1 1782-JDM Outline
3.2 LED Operation
A ASCII Multiplexer has two LEDs that provide visual status information to the user about the
product and the DeviceNet network. See Table 3-1 and Table 3-2.