User`s manual

Western Reserve Controls WRC-CANX-xx Series 3
PUB 14.0 User’s Manual
7
4. General Specifications
Product: WRC-CANX-DIN and WRC-CANX-NEM CAN-Bus Extender, Series 3
Description: Electrical extender to extend the permitted cable distances defined for CAN-
based network products
Device Type: Communications Extender
Product Revision: 3.xx
DeviceNet Conformance: Designed to conform to the ODVA DeviceNet Specification Version 2.0.
Baud rate: 125K, 250K, 500K - automatic selection
Address selection: Not applicable
Bus Connection: WRC-CANX-DIN
Extender: 5-pin pluggable header (male pins)
Phoenix Contact MSTBA 2.5/5-G-5.08/AU
CAN-Bus Cable: 5-contact plug (female contacts)
Phoenix Contact MSTB 2.5/5-ST-5.08/AU (included)
WRC-CANX-NEM
Extender: Woodhead # 51354, female sockets, female threads
Woodhead # 1R5006A17A120, male pins, male threads
CAN-Bus Cable: See accessories list
Status Indicators: Module Status: green/red bi-color LED
Network A Status: green/red bi-color LED
Network B Status: green/red bi-color LED
Diagnostic Data: green/red bi-color LED
Voltage Isolation: 2500 V
Maximum power: Voltage: 11 - 25 Vdc
Current: Network A: 140 mA @ 11 Vdc - 60 mA @ 25 Vdc
Network B: 20 mA @ 11 Vdc - 10 mA @ 25 Vdc
Power: 1.8 W
Mounting: WRC-CANX-DIN: DIN rail mount, EN 50022
WRC-CANX-NEM: Panel-mount, 4 screws
Size: WRC-CANX-DIN WRC-CANX-NEM
Length: 4.32” (110 mm) 5.11” (130 mm)
Depth: 1.79” (45,5 mm) 2.27” (57,7 mm)
Height: 3.44” (87,4 mm) 3.70” (94,0 mm)
Operating Temp: 0-70 ºC
Humidity: 0-95% RH, non-condensing