User`s manual
Western Reserve Controls WRC-CANR-DF-DN and –SM User’s Manual
PUB 14.2 Revision 4.03
5
3. General Specifications
Product: WRC-CANR-DF-DN and WRC-CANR-DF-SM, Series IV CAN-Bus Extender
and Fiber Optic Converter
Description: Electrical Extender to extend the cable distances of CAN-based protocol
products and convert the copper network to a fiber optic link.
Device Type: Communications Extender
Product Revision: 4.xx WARNING: Series IV F/W Revision 4.002 is not backward compatible
DeviceNet Conformance: Designed to conform to the ODVA DeviceNet Specification
Baud rate: 9.6K, 10K, 20K, 40K, 50K, 100K 125K, 250K, 500K, 800K and 1M baud fixed
or auto-detect baud rate on DeviceNet
Address selection: Not applicable
Bus Connection: Used On Device: Woodhead # 1R5006A17A120, male pins, male threads
CAN-Bus Cable: See accessories list
Fiber Optic Cable: For WRC-CANR-DF-DN:
• 62.5/125µm, multi-mode, ST termination
For WRC-CANR-DF-SM:
• 9/125µm single mode, ST termination
Fiber Cable Length: DN: 2200 meters (max)
SM: 12k meters (max)
Fiber Connection: Used On Device: ST female
Fiber Cable: ST male
Status Indicators: MS - Module Status: green/red bi-color LED
NSA - Copper Network A Status: green/red bi-color LED
NSB - Fiber Network B Status: green/red bi-color LED
DGN - Diagnostic Data: green/red bi-color LED
TXF - Fiber Transmit Active: green LED
RXF - Fiber Receive Active: green LED
Voltage Isolation: Provided by fiber cable system
Maximum power: Voltage: 11 - 25 Vdc
Current: 110 mA @ 11 Vdc - 60 mA @ 25 Vdc
Power: 1.5 W
Mounting: Panel-mount, 4 screws
Size: Length: 5.11” (130 mm)
Depth: 2.27” (57.7 mm)
Height: 3.70” (94.0 mm)
Operating Temp: 0-70 ºC
Humidity: 0-95% RH, non-condensing
Agency Approvals and Agency: CE
Certifications: