User`s manual

Western Reserve Controls 1782-JDM User’s Manual
PUB 24.0 PRELIMINARY
13
3 Hardware Installation and Configuration
3.1 Overview
The ASCII contains two LEDs to indicate the status of the device and the status of the network. The
device can be connected to the main DeviceNet trunk line or to a drop line via screw terminations on the
open, pluggable 5-pin DeviceNet connector supplied with your unit. The serial link is connected via an
open, pluggable 3-pin connector for RS232 and RS485, or a 5-pin connector for RS422.
NS
MS
A
D
D
R
E
S
S
V+
CAN_H
N/C
CAN_L
V -
SG+
SG -
GND
S+
S-
G
1782-JDM
Modbus
CONVERTER
DeviceNet
0=RIGHT
1=LEFT
SELECT
ADDRESS
63=ADDR
1
2
4
8
16
32
36=ADDR
0
0
4
0
0
32
9=ADDR
1
0
0
8
0
0
3.11(79)
3.540 (89.9)
0.984 (25)
0.394
(10)
2.920 (74.2) 0.160 (4.1)
Figure 3-1 1782-JDM Outline