User Manual
Table Of Contents
- Registering Your WD Product
- WD Service and Support
- Important User Information
- Product Overview
- Getting Started
- The Dashboard at a Glance
- Managing Users and Groups
- Managing Shares
- Accessing Your Cloud Remotely
- Backing Up and Retrieving Files
- Managing Storage
- Managing Apps
- Playing/Streaming Videos, Photos, & Music
- Configuring Settings
- Regulatory Information
- Appendices
- Index
APPENDICES
108
MY CLOUD USER MANUAL
5. Remove and replace the SO-DIMM memory module.
Note: This device uses memory modules in coordinated pairs. For a list of supported
memory modules, refer to http://support.wdc.com.
6. Once the pair of SO-DIMM memory modules have been changed, replace the unit cover and
replace and tighten the three (3) exterior screws.
Note: When replacing the cover back to the unit, be careful not to touch or damage the
components on the PCBA.
Note: Do not over-tighten the PCBA screws.
7. Connect all external connections.
8. Restart the device.