User Manual
Table Of Contents
- Registering Your WD Product
- WD Service and Support
- Important User Information
- Product Overview
- Getting Started
- The Dashboard at a Glance
- Managing Users and Groups
- Managing Shares
- Accessing Your Cloud Remotely
- Backing Up and Retrieving Files
- Managing Storage
- Managing Apps
- Playing/Streaming Videos, Photos, & Music
- Configuring Settings
- Regulatory Information
- Appendices
- Index
APPENDICES
107
MY CLOUD USER MANUAL
Appendix F: Replacing the SO-DIMM Memory Module
Note: This procedure is applicable for the My Cloud PR4100 only.
The SO-DIMM memory module in the My Cloud device is upgradeable. The My Cloud device
must be powered off prior to module replacement.
For details about the supported memory module, refer to http://support.wdc.com.
What you’ll Need:
Phillips screwdriver
Replacement SO-DIMM Memory module
Replacing a SO-DIMM Memory Module
1. Before getting started, shut down the My Cloud device and disconnect all external
connections.
2. Place the unit on a clean and stable surface, with the back of the unit facing you.
3. Release three (3) screws on the back of the unit.
4. Pull the unit cover toward you and up to release the cover.