User's Manual
Table Of Contents
- WD® Service and Support
- WD Guardian Services
- Important User Information
- Product Overview
- Connecting the Server and Getting Started
- Managing the WD Sentinel Server (Dashboard)
- Setting up WD Sentinel Server & Connecting Computers
- Accessing the Dashboard
- Tips for Performing Dashboard Tasks
- Adding a User Account
- Performing Dashboard Tasks
- Using the Home Page
- Managing User Accounts
- Managing Devices
- Managing Storage
- Monitoring Applications
- Monitoring System Health and Alerts
- Updating Software
- Managing Server Settings
- Shutting Down and Rebooting the Server
- Managing Storage on the WD Sentinel Server
- Using the WD Sentinel Server’s Features
- Using the Launchpad (Internal Users)
- Accessing Shared Folders Over Your Network
- Accessing Computers and Shared Folders Remotely
- Backing up (Windows PC)
- Backing up with Time Machine (Mac)
- Recovering/Restoring (Windows PC)
- Recovering/Restoring (Mac)
- Backing up your WD Sentinel Server
- Recovering a WD Sentinel Server Image or Resetting the Boot Drives to Factory Defaults
- Best Practices
- Troubleshooting
- Regulatory and Warranty Information
- Appendix
- Index
APPENDIX
90
WD SENTINEL DS5100/DS6100
ADMINISTRATOR AND MAINTENANCE GUIDE
8. Once the 2PL-SODIMM module has been added or updated, replace the PCBA back
on the WD Sentinel device, ensuring that the cables are again attached to the
assembly and that the PCBA is properly seated. Replace and tighten the six (6) screws
holding the PCBA in place.
Note: Do not over-tighten the PCBA screws.
9. Replace the unit cover and replace and tighten the five (5) exterior screws.
Note: Do not over-tighten the exterior screws.
10. Connect all external connections.
11. Restart the server.