User Manual

4. Managing the Wireless Drive Managing Wireless Drive Settings
SanDisk Connect™ Wireless Flash Drive User Manual for iPhone, iPad, or iPod touch 38
Note: Creating a Wi-Fi password allows you to limit access to your Drive when you connect
directly to it. But the Wi-Fi password does not limit access when your Drive is
connected to an Internet Wi-Fi network, where anyone who has installed the Wireless
Flash Drive app can access your Drive.
Restoring Factory Settings
If you forget your password or if your Wireless Drive becomes unresponsive, you can
reset the Drive to its default factory settings. This erases your password and forces
the Drive to reboot, but it does NOT delete any content stored on the Drive. Once the
Drive has rebooted, you can set a new password.
To reset the Drive,
1. Turn off the Wireless Drive.
2. Hold in the Wi-Fi button for 20 seconds.
After about 20 seconds the amber and blue flash alternately two times (this is the
actual reset) and the drive resets and stays on.
Using Internet Connection
Your mobile device or computer can wirelessly access content on your Drive and at
the same time remain connected to the Internet as long as a wireless Internet
network is available. (Some wireless networks might block this functionality.)
1. On the Settings screen, tap Internet Connection to open the Internet
Connection screen: