User Manual

4. Managing the Wireless Drive Managing Wireless Drive Settings
SanDisk Connect™ Wireless Flash Drive User Manual for Android 40
5. Turn your Wireless Drive off and then back on to complete the password change.
Note: Creating a Wi-Fi password allows you to limit access to your Drive when you connect
directly to it. But the Wi-Fi password does not limit access when your Drive is
connected to an Internet Wi-Fi network, where anyone who has installed the Wireless
Flash Drive app can access your Drive.
Restoring Factory Settings
If you forget your password or if your Wireless Drive becomes unresponsive, you can
reset the Drive to its default factory settings. This erases your password and forces
the Drive to reboot, but it does NOT delete any content stored on the Drive. Once the
Drive has rebooted, you can set a new password.
To reset the Drive,
1. Turn off the Wireless Drive.
2. Hold in the Wi-Fi button for 20 seconds.
After about 20 seconds the amber and blue LEDs flash alternately two times (this
is the actual reset) and the drive resets and stays on.
Setting the Power Save Timer
You can set your Wireless Drive to power down after it’s been idle for a specified
amount of time.