User's Guide

Getting Started
Connecting to iPhone 6 or iPhone 6s
Physical connection
1. Remove the top of the case from the case frame by lifting the corner of
the cap over the locking piece.
2. Slide the iPhone 6 or iPhone 6s into the case bottom first.
3. Slide it in until the Lightning connector inserts fully into the iPhone.
4. The cap is oriented so that it will only fit in one direction onto the case.
Please orient it so that the grooves in the case fit in the correct
direction. Note: The inside of the cap is also labeled Left and Right to
help you orient it.
5. To lock the cap in place, lift the corner of the cap over the locking piece.
To ensure a tight fight, make sure both sides are connected by
squeezing the top cap against the phone.
Your iPhone will detect the case and notify you to install the iXpand Case app from the App Store. Follow the
instructions in the app to use your iXpand Memory Case.