User Manual

CONFIGURING SETTINGS
79
MY CLOUD USER MANUAL 
NFS Service Network File System. Select this option to enable NFS Service for your
network, which allows a user to access files over a network.
• To enable/disable NFS Service, click the toggle button.
WARNING! Mounting or ejecting a USB drive while performing a file
transfer will interrupt the file transfer process.
WebDAV Service Select this option to enable Web Distributed Authoring and Versioning
(WebDAV) service to enable web access to content within the same
network.
• To enable/disable WebDAV Service, click the toggle button.
Note: In order to connect to the WebDAV service, use the following IP
address: http://<server ip address>:8080/Public
SNMP Simple Network Management Protocol (SNMP) manage devices over IP
networks. Select from the following to choose all, or a specific SNMP
version:
1. Click All to enable v2c and v3 SNMP versions.
• Location:
• Contact Information
• Notifications: Click the toggle button to set Notifications to ON, and
enter the Notification IP Address.
• User Management (SNMPv3): Click Users, and then click Add User.
Enter the User Name. Click the View drop-down menu to allow
queries at the System level and Network level, or select All to allow
queries to all device information.
• Click Apply.
2. Click v2c.
• Location
• Contact Information
• Notifications: Click the toggle button to set Notifications to ON, and
enter the Notification IP Address.
• Click Apply.
3. Click v3.
• Location
• Contact Information
• Notifications: Click the toggle button to set Notifications to ON, and
enter the Notification IP Address.
• To add Users, click Users, and then click Add User. Enter the User
Name. Click the View drop-down menu to allow queries at the System
level and Network level, or select All to allow queries to all device
information.
• Click Apply.
4. Click Off to turn off SNMP service.
See the WD Tech Support Downloads page at http://support.wdc.com to
download the MiB configuration file.