User Manual

MANAGING STORAGE
57
MY CLOUD USER MANUAL 

Target: A network-attached storage device that provides access to logical disks (which
can be created on the My Cloud device).
Creating an iSCSI Target
Use the following steps to create an iSCSI target
1. On the Storage page, click iS
CSI, if not already selected.
2. Under iSCSI Targets, click the toggle button to ON to
enable iSCSI.
3. Click Cr
eate iSCSI Target at the bottom of the screen.
4. On the Create iSCSI Target screen, enter the following information:

Alias: The alias should be a descriptive name for your target.

Created On: Select the Volume where you’d like the iSCSI target to reside.

Size: The size of your target and the unit of information for that size (e.g. GB, TB). Click
Next.

If you’d like to assign security for your target, click CHAP.
- Enter an existing User Name and Password, then confirm the Password.
5. Click Apply.
Your new iSCSI target is created and displays in the iSCSI Target List.
Enabling / Disabling an iSCSI Target
Use the following steps to enable or disable an iSCSI target.
Enabling an iSCSI Target
1. On the Storage page, click iSCSI.
2. Under iSCSI Target list, click Details next
to the target you’d like to enable.
3. Click Enable.
The selected target is now enabled.
Disabling an iSCSI Target
1. On the Storage page, click iSCSI.
2. Under iSCSI Target list, click Details next
to the target you’d like to disable.
3. Click Disable.
The selected target is now disabled.
Modifying an iSCSI Target
Use the following steps to modify an iSCSI target.