Installation guide

V4.2
www.westermo.com
U/R/T200 series
- 29 -
Black * - Minus supply voltage (Ground) *
Red * + Plus supply voltage *
* Supply voltage is not present on RS422 connector on switch. Supply voltage must be from external
power supply. (Reason is that the FS200 series of switches can operate on up to 60VDC, while the
Acutime 2000 requires 24VDC power supply). The Acutime can also be powered from the same power
source as the switch via the power plug if the switch is powered from external 24VDC.
See tables below for more details about signal routing.
Table 1 shows the pin-out of the T200 GPS interface connector, and table 2 shows the pin-
out of the Acutime 2000.
Pin nr Function Description
1 RS422 TX + RS422 positive transmitter output to GPS
2 RS422 RX + RS422 positive receiver input from GPS
3 PPX OUT2 TTL OUT2, PPX output TTL signal
4 PPS RS422 RX+ Pulse per second input from GPS RS422 I/F
5 PPS TTL INPUT Pulse per second input from GPS TTL level
6 PPX OUT1 TX- OUT1, PPX RS422 negative transmitter output
7 PPX/TTL 0V Return path for RS232 and TTL signals
8 PPX OUT2 TX- OUT2, PPX RS422 negative transmitter output
9 PPX OUT1 TTL OUT1, PPX output TTL signal
10 RS232/TTL 0V Return path for RS232 and TTL signals
11 RS422 TX- RS422 negative transmitter output to GPS
12 RS422 RX- RS422 negative receiver input from GPS
13 PPX OUT2 TX+ OUT2, PPX RS422 positive transmitter output
14 PPS RS422 RX- Pulse per second input from GPS RS422 I/F
15 PPX OUT1 TX+ OUT1, PPX RS422 positive transmitter output
Table 1, pin-out GPS interface connector
Pin nr/ Wire color Function Description
1/Red +8-36V Positive DC power
2/Violet Port B RS422 RX- Port B RS422 Negative receive
3/Orange Port B RS422 RX+ Port B RS422 Positive receive
4/Brown Port B RS422 TX- Port B RS422 Negative transmit
5/Yellow Port B RS422 TX+ Port B RS422 Positive transmit
6/White Port A RS422 RX- Port A RS422 Negative receive
7/Gray Port A RS422 RX+ Port A RS422 Positive receive
8/Green Port A RS422 TX- Port A RS422 Negative transmit
9/Black Ground Negative DC power / ground
10/Blue Port A RS422 TX+ Port A RS422 positive transmit
11/Orange w/ white
stripe
PPS RS422 TX+ RS422 Pulse per second positive
transmit
12/Black w/ White
stripe
PPS RS422 TX- RS422 Pulse per second negative
transmit
Table 2, pin-out Acutime Gold interface connector
Connector type T200:
15-pol high density D-sub type connector, female part on the switch and male part on cable
assembly.