Technical data

80 Theoretical and general applications www.westermo.com

S00 The content of the register tells the modem after how many ring signals the

modem should answer. In this example the modem answers on the second

ring signal as the value is set to 002.

S01 Counts the number of incoming ring signals.

S02 Describes which character should be used for the Escape sequence.

S03 Describes which character should be used for the Carriage return.

S04 Describes which character should be used for the Line Feed.

S05 Describes which character should be used for the Backspace.

S07 Describes how many seconds the modem should wait for the carrier before

hanging up.

S10 Describes how long the modem should wait before hanging up when the

carrier has been lost.

The screen shot showing

the content of the modem’s

registers, a complete specifi-

cation of the registers can be

found in the manual for the

modem. The example below

describes some of the func-

tions in the S-registers

B A C K