Technical data

www.westermo.com Theoretical and general applications 79
ATQn – Quiet Result Code Control
The result codes sent from the modem are activated or deactivated, some appli-
cations require the modem to be set so no characters are sent.
ATEn – Echo on/off
Turns echo on/off to a connected terminal. This is required by some applications
and can also cause confusion when attempting to enter commands.
AT&V – Display Current configuration and Stored Profiles
The command lists the contents of the profiles and S-registers stored in the
modem, which in turn are used for function configuration. See the example
on page 80.
AT&Wn – Store Current Configuration
Saves the current configuration in the modem to profile 0 or 1.
ATZn – Soft Reset and Restore Profile
A software reset is made on the modem, resets to the configured profile.
ATO – On Line Data Mode
The modem switches to data mode.
+++ Switches from On Line Data Mode to command mode.
B A C K