Specifications


ManagementVLANID:TheswitchsupportsmanagementVLAN.The
managementVLANIDistheVLANIDoftheCPUinterfacesothatonlymember
portsofthemanagementVLANcanpingandaccesstheswitch.Thedefault
managementVLANIDis1.
StaticVLAN:YoucanassignaVLANIDandVLANNamefornewVLANhere.
VLANIDisusedbytheswitchtoidentifydifferentVLANs.ValidVLANIDis
between1and4094.1isthedefaultVLAN.
VLANNameisareferencefornetworkadministratortoidentifydifferentVLANs.
Theavailablecharacteris12foryoutoinput.Ifyoudon’tinputVLANname,the
systemwillautomaticallyassignVLANnamefortheVLAN.TheruleisVLAN
(VLANID).


ThestepstocreateanewVLAN:TypeinVLANID
andNAME,andpressAddtocreateanewVLAN.
ThenyoucanseethenewVLANintheStaticVLAN
Aftercreatedthe VLAN,thestatusoftheVLANwill
remaininUnuseduntilyouaddportstotheVLAN.
Note:BeforeyouchangethemanagementVLANIDbyWebandTelnet,remember
thattheportattachedbytheadministratorshouldbethememberportofthe
managementVLAN;otherwisetheadministratorcan’taccesstheswitchviathe
network.
86