Specifications

inthenetwork.Toconfigurethisportasanedgeport,settheporttotheEnable

state.Whenthenon‐bridgedeviceconnectsanadminedgeport,thisportwillbe

inblockingstateandturntoforwardingstatein4seconds.

Onceyoufinishyourconfiguration,clickonApplytosaveyoursettings.



4.5.3 RSTPInfo



Thispageallowsyoutoseetheinformationoftherootswitchandportstatus.

RootInformation:YoucanseerootBridgeID,RootPriority,RootPort,RootPath

CostandtheMaxAge,HelloTimeandForwardDelayofBPDUsentfromtheroot

switch.

PortInformation:YoucanseeportRole,PortState,PathCost,PortPriority,Oper

P2Pmode,OperedgeportmodeandAggregated(ID/Type).



