Specifications

Description g w rSetthewarnin waterleveloftotalpo e budget.
Examples Setthewarning
Switch(config‐if)#
waterlevelto60%
poebudgetwarning60
Syntax poepd_detectenable/disable
Parameters enable:enablePDStatusDetectionfunction
ctiondisable:disablePDStatusDetectionfun
CommandMode Configurationmode
Description tectionfunctionEnable/DisablethePDStatusDe
Examples Toenablethefunctionofpdstatusdetectfunction
Switch(config)#poep
Todisablethefunctio
d_detectenable
nofpdstatusdetectfunction
Switch(configf)#poepd_detectdisable
Syntax poepd_detectip_addresscycle_time
Parameters
secondandmustbemultipleof10
IPaddress:A.B.C.D
Cycletime:Validrange10‐3600
CommandMode Configurationmode
Description ApplyaruleofPDStatusDetection.
Examples Apply a rule which ping 192.160.1.2 per 20 seconds. And if
‐enablethePoE.192.160.1.2istimeout,pdstatusdetectionwillre
Switch(config)#poepd_detect192.160.1.220


63