Specifications

4.4 PoweroverEthernet
PoweroverEthernetisthekeyfeaturesofPMIPoESwitch.Itisfullycompliance
withIEEE802.3afandIEEE802.3atthatinclude1‐eventwithIEEE802.1ABLLDP
classificationand2‐eventclassificationmechanismsforPoEMDI.The
PMI‐110‐F2Gadapts8‐PortPoEinjectorsinport1toport8,eachportwiththe
abilitytodeliver30WtocompatibleIEEE802.3atstandardandprovides120w
powerbudgetforhallsystem.Therefore,selectandinstallthePoEPDsystemis
Thefollowingcommandsareincludedinthissection:
4.4.1PoEControl
4.4.2PoEScheduling
4.4.3PoEStatus
4.4.4CommandLineforPoEcontrol


4.4.1 PoEControl

ThePoEcontrlincludes3parts‐PoESystem,PortconfigurationandPDstatus
detection.Thefollowingwilliintroducethefunction.

PoESystemDialogue


PoESystem:enableordisablesystem’sPoEfunction.
Budget(W):thepowersupplymaximumoutputbudget.Bothpowerbudgetof
DC1andDC2willbeaggregated.
Voltage(V):thevoltageofappliedtothepowerinput.Here,wesuggestuses
samespecificationofpowersupply.Ifthepowersupplywithdifferentoutput
voltage,itmaycasuesystemdrawmorecurrentfromonepowermodelwhich
withhighervoltage.
WarningWaterLevel(%):thewarninglevelisforsystemwarningtoalertsuser
whenPoEsystemdrawingpowerthatmeetthewarningleveluserdefined.

PortConfigurationDialogue





56
