Specifications

Summaryofthe5commandmodes.
Command
Mode
MainFunction EnterandExitMethod Prompt
UserEXEC Thisisthefirstlevelofaccess.
Usercanping,telnetremote
device,andshowsomebasic
information
Enter:Loginsuccessfully
Exit:exittologout.
Nextmode:Typeenabletoenter
privilegedEXECmode.
Switch>
PrivilegedEXEC Inthismode,thesystemallowsyou
toviewcurrentconfiguration,reset
default,reloadswitch,showsystem
information,save
configuration…andenterglobal
configurationmode.
Enter:TypeenableinUserEXEC
mode.
Exec:Typedisabletoexittouser
EXECmode.
Typeexittologout
NextMode:Typeconfigure
terminaltoenterglobal
configurationcommand.
Switch#
Global
configuration
Inglobalconfigurationmode,you
canconfigureallthefeaturesthat
thesystemprovidesyou
Enter:Typeconfigureterminalin
privilegedEXECmode
Exit:Typeexitorendorpress
CtrlZtoexit.
Nextmode:Typeinterface
IFNAME/VLANVIDtoenter
interfaceconfigurationmode
Switch(config)#
Port
Interface
configuration
Inthismode,youcanconfigure
portrelatedsettings.
Enter:TypeinterfaceIFNAMEin
globalconfigurationmode.
Exit:TypeexitorCtrl+Ztoglobal
configurationmode.Typeendto
privilegedEXECmode.
Switch(configif)#
VLANInterface Inthismode,youcanconfigure Enter:TypeinterfaceVLANVID Switch(configvlan)#
Switch(config)# interface vlan 1
Switch(config-if)#
description Interface specific description
end End current mode and change to enable mode
exit Exit current mode and down to previous mode
ip Interface Internet Protocol config commands
list Print command list
no Negate a command or set its defaults
quit Exit current mode and down to previous mode
shutdown Shutdown the selected interface
30