User`s manual

97
Type)
Duplex : Auto
Speed : Auto
Flow Control :off
Default Port VLAN ID: 2
Ingress Filtering : Disabled
Acceptable Frame Type : All
Port Security : Disabled
Auto Negotiation : Enable
Loopback Mode : None
STP Status: disabled
Default CoS Value for untagged packets is 0.
Mdix mode is Auto.
Medium mode is Copper.
Display – Port
Egress Rule (Egress
rule, IP address,
status)
Switch# show running-config
……
!
interface fastethernet1
switchport access vlan 1
switchport access vlan 3
switchport trunk native vlan 2
…….
interface vlan1
ip address 192.168.10.8/24
no shutdown
QinQ Information –
802.1Q Tunnel
Switch# show dot1q-tunnel
dot1q-tunnel mode
port 1 : normal
port 2 : normal
port 3 : normal
port 4 : normal
port 5 : access
port 6 : uplink
port 7 : normal
port 8 : normal
port 9 : normal
port 10 : normal