User`s manual

91
Ingress Filtering: Ingress filtering helps VLAN engine to filter out undesired traffic
on a port. When Ingress Filtering is enabled, the port checks whether the
incoming frames belong to the VLAN they claimed or not. Then the port
determines if the frames can be processed or not. For example, if a tagged frame
from Engineer VLAN is received, and Ingress Filtering is enabled, the switch will
determine if the port is on the Engineer VLAN’s Egress list. If it is, the frame can
be processed. If it’s not, the frame would be dropped.
After 802.1Q Tunnel or 802.1Q Tunnel Uplink is enabled, the Ingress Filtering can
not be configured.
4.5.2 VLAN Configuration
In this page, you can assign Management VLAN, create the static VLAN, and
assign the Egress rule for the member ports of the VLAN.
Figure 4.5.2.1 Web UI of the VLAN Configuration.
Management VLAN ID: The switch supports management VLAN. The
management VLAN ID is the VLAN ID of the CPU interface so that only member
ports of the management VLAN can access the switch. The default management
VLAN ID is 1.
Static VLAN: You can assign a VLAN ID and VLAN Name for new VLAN here.